Library

Technical Document

How to Replace a Deluxe Mirror Head with a Heated/Remote Flat Glass and a Heated/Manual Convex

Step-by-step instructions for replacing a Velvac Deluxe mirror head that has a heated/remote flat glass and a heated/manual convex glass attached to either a 2025 or 2030-style base

How to Replace a Deluxe Mirror Head with a Heated/Remote Flat Glass and a Heated/Remote Convex

Step-by-step instructions for replacing a Velvac Deluxe mirror head that has a heated/remote flat glass and a heated/remote convex glass attached to either a 2025 or 2030-style base

How to Replace the Mirror Inner Support Plate

Guidelines for how to replace the inner support plate in Deluxe mirror heads

Glass Replacement Instructions for VMAX and Deluxe Mirrors

Instructions for replacing the flat and convex glass for VMAX and Deluxe mirror heads

Owner's Manual - 2025, 2030 and Revolution Mirrors

The owner's manual for the Velvac 2025, 2030 and Revolution mirror assemblies provides installation and service information to ensure a long service life

2020 and 2020 XG Mirrors - Owner's Manual

The owner's manual for the Velvac 2020 and 2020 XG mirror assemblies for the GM G-Van, Ford E-Van and Ford F-Series chassis provides installation and service information to ensure a long service life

2020 Mirror Wiring Diagram - Ford E-Van Chassis

2020 Mirror wiring diagram for the Ford Econoline Van chassis

2020 Mirror Wiring Diagram - GM G-Van Chassis

2020 Mirror wiring diagram for the GM G-Van chassis

2020 Mirror Wiring Diagram - Ford F-Series Chassis

2020 Mirror wiring diagram for the Ford F-Series truck chassis

2020 XG Mirror Wiring Diagram

2020 XG Mirror wiring diagram for the Chevy/GM G-Van, Ford E-Van and Ford F-Series chassis

ClearCAM Integrated LEM Cameras - Owner's Manual

The owner's manual for the Velvac ClearCam integrated camera system for V-Max and V-MAX III mirror assemblies provides installation, adjustment and service information to ensure a long service life

Regulation

Rearview Mirrors Standard FMVSS 571.111

This mirror regulation stipulates (1) requirements for the location and operation of rearview mirrors; (2) that vehicles with GVWR of 11,340 kg or more must have outside mirrors of unit magnification with 323 cm2 or more of reflective surface with an average reflectance of 35% or more; (3) mirrors must be mounted on both sides so the driver can see the truck along the inner sides of the driver and passenger-side mirrors and has a representative view of the rearward area in the rest of the mirror; and (4) that mirrors of "unit magnification” must provide a reflected view that is equivalent to that of the actual view at the same distance. These requirements are critical to maintaining accurate speed and distance judgments of images in mirrors, helping drivers to safely operate commercial vehicles, and of which Velvac vision systems are designed to exceed.

SAE J985 Vision Factor Considerations in Rearview Mirror Design

The design and location of rear viewing mirrors or systems, and the presentation of the rear view to the driver can be best achieved if the designer and the engineer have adequate references available on the physiological functions of head and eye movements and on the perceptual capabilities of the human visual system. SAE J985 provides information and charts for this purpose, of which Velvac uses to help design intuitive vision systems to help make operating commercial vehicles safer. To read this standard, please visit the SAE website.

Brochure

Back Up Camera Systems

Single Page sell sheet regarding Velvac Back Up Camera Systems.

Back Up Cameras & Monitors

Single page sell sheet referencing back up side and rear view cameras, as well as 5" & 7" monitors.